The Eclipse™ SS water cooler combines reliable,
long-lasting components, simple maintenance procedures and handsome
housing. Its modular polypropylene panels lift off to speed servicing
of your water filters or you can replace all of the panels for
a fresh new look. The Eclipse™ SS is the perfect water cooler
to be used with our triple
water filtration system.
|
Cabinet Shell:
|
Modular polypropylene cabinet. Resists cracks, fading and
yellowing. Color molded into cabinet to hide scrapes caused
by rough usage.
|
|
Frame:
|
A heavy gauge galvanized steel frame provides added strength
and support.
|
|
Refrigeration Unit:
|
Convection cooled condenser. Internally spring mounted,
hermetically sealed compressor with automatic overload protector.
No lubrication needed. Environmentally friendly R134a refrigerant.
|
|
Hot Tank:
|
Type 304 stainless steel. 500 Watt externally mounted band
type heating element can be easily removed without draining
the water from the cooler. Storage capacity is 1-1/2 quarts
(1.4 liters).
|
|
Hot Water Thermostat:
|
Automatic thermostat factory set at approximately 180F
- 190F (82C - 88C). Hot tank is protected by a heat limiter
in the event of a thermostat failure. A hot tank on/off
switch located on the shelf is easily accessible from rear.
An optional adjustable thermostat is also available at extra
cost.
|
|
Electrical:
|
115 Volts, 60 Hz. Compressor HP: 1/20 full load. Amps:
CECPM-1H 5.5; Removable three wire service cord and polarized
plug furnished.
|
|
Net Weight (approx.):
|
40.0 lbs.(18.1 kg).
|
|
Shipping Weight:
|
44.0 lbs. (20.0 kg.)
|
|
Shipping Dimensions:
|
Height: 39.0 in. (99.1 cm.) Width: 13.2 in. (33.5 cm.)
Depth: 15.5 in. (39.4 cm.) With WaterSafeTM installed add
2.5 in. (6.4 cm.) to Height
|
|
Certified in accordance with the ARI Self-Contained,
Mechanically-Refrigerated Drinking Water Coolers Certification
Program, which is based on ARI Standard 1010-94.
|
CALL
TODAY AND START SAVING!